Kirisun DP580-01 User Manual Download Page 16 | Manualshive

Page: 16 / 69

background image

DP580-01 Digital Two-way Radio

15

for meeting occupational exposure requirements. The highest reported SAR values for

Front-of-face:

1.361W/Kg, body-worn: 3.108W/Kg.

Warning! : This portable radio generates RF electromagnetic energy during transmit mode. This radio is
designed for and classified as “Occupational Use Only,” meaning it must be used only during the course of

employment by individuals aware of the hazards and the ways to minimize such hazards. This radio is NOT
intended for use by the “General Population” in an uncontrolled environment.

FCC Statement

–

This radio is designed for and classified as

“

Occupational/Controlled Use Only

”

, meaning it must be

used only during the course of employment by individuals aware of the hazards, and the ways to minimize
such hazards; NOT intended for use in an General population/uncontrolled environment

–

DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may

also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by
the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio.

–

DO NOT transmit for more than 50% of total radio use time, more than 50% of the time can cause RF

exposure compliance requirements to be exceeded.

«
...
14
15
16
17
18
...
»

Summary of Contents for DP580-01






































































Reviews:

No comments

Related manuals for DP580-01

Brand: Makita Pages: 12

Brand: AUDIOLINE Pages: 28

Brand: Audiovox Pages: 62

Brand: QFX Pages: 6

Brand: Midland Pages: 16

Brand: Midland Pages: 19

Brand: AWA Pages: 9

DTEx Land Series

Brand: Entel Pages: 6

Brand: Entel Pages: 24

Brand: Xact Pages: 67

Brand: Tait Pages: 15

Brand: Tait Pages: 73

Brand: Motorola Pages: 15

Talkabout T9500 Series

Brand: Motorola Pages: 14

Brand: Federal Signal Corporation Pages: 12

Brand: Medion Pages: 99

Brand: Roadstar Pages: 11

Brand: Retevis Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands