Kirisun DP580-01 Page 39 User Manual Download

Page: 39 / 69

User Manual

6.4 Initiating a Call

If the current channel is digital, you may perform any of the followings.

Call the default contact: Press the PTT key. The indicator will be on with red light, indicating the radio is

transmitting signals. The call page containing the contact name and the call type will be displayed. The

default contact of the current channel can be set by the dealer through programming, or via the menu in

the contact list.
Select and call a contact: Go to the “Contact” menu, and select a contact from the Contact List, and then
press the PTT key to call.

Dial to call: Go to the Contact menu and then the Manual Dial page, enter a contact ID, and then press the

PTT key to call.

If the current channel is analogue, press the PTT key to call. The indicator will be on with red light,

indicating the radio is transmitting signals.

6.5 Receiving a Call

When the radio receives RF signals on the current channel and the squelch level is reached, the green

Summary of Contents for DP580-01






































































Search results

Summary of Contents for DP580-01

Reviews:

Related manuals for DP580-01

Brands by name

Popular brands

Kirisun DP580-01, User Manual

Search results

Summary of Contents for DP580-01

Reviews:

Related manuals for DP580-01

Brands by name

Popular brands