Kirisun DP580-01 User Manual Download Page 5 | Manualshive

Page: 5 / 69

background image

User Manual

4

damage the product and result RF discomfort.

◆

Using the designated accessories

Use the antenna, battery, adapter or charger supplied or sold by Kirisun only, or otherwise it causes damage
to the product.
If you want to purchase or replace the accessories, please contact your local dealer or Kirisun.

◆

Area restrictions

1. To avoid of the problems caused by electromagnetic interference or electromagnetic compatibility, turn off
the radio in any facilities where posted notices instruct you to do so, such as hospital and other health care
facilities. Turn off the radio when on board an aircraft, if instructed to do so.
2.  In  the  vehicle  with  an  air  bag,  do  not  place  the  radio  in  the  area  over  an  air  bag  or  in  the  air  bag
deployment area.
3. Turn off the radio before entering any area with a potentially explosive atmosphere or blasting caps.
4.  Do  not  operate  the  radio,  disassemble or  charge  the  battery  in the  potentially  flammable and  explosive
atmosphere (such as gas station, coal gas station, etc.).
5. Do not place the radio under the direct sunlight or near the area with heating devices.

«
...
3
4
5
6
7
...
»

Summary of Contents for DP580-01






































































Reviews:

No comments

Related manuals for DP580-01

Brand: Radwin Pages: 252

Brand: Radwin Pages: 6

Brand: C. Crane Pages: 48

Brand: Navman Pages: 16

Brand: InTouch Pages: 39

Brand: Radio Shack Pages: 16

Brand: Sangean Pages: 80

Brand: Denver Pages: 22

Brand: Num'axes Pages: 28

Brand: SLIVE Pages: 2

Brand: Sharp Pages: 12

Brand: Sharp Pages: 15

Brand: Sharp Pages: 27

Brand: Sharp Pages: 44

Brand: Sharp Pages: 44

Brand: Sharp Pages: 76

Brand: Sharp Pages: 172

Brand: Maximon Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands