Kirisun DP580-01 User Manual Download Page 17

Page: 17 / 69

User Manual

–

This transmitter may operate with the antenna(s) documented in this filing in Push-to-Talk and body-worn

configurations. RF exposure compliance is limited to the specific belt-clip and accessory configurations as

documented in this filing and the separation distance between user and the device or its antenna shall be

least 2.5 cm.

–

The highest reported SAR values for Front-of-face:

1.215W/Kg , body-worn: 4.468W/Kg.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired

operation.

–

For a Class B digital device or peripheral, the instructions furnished to the user shall include the following

or similar

statement, placed in a prominent location in the text of the manual:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation.

Summary of Contents for DP580-01






































































Search results

Summary of Contents for DP580-01

Reviews:

Related manuals for DP580-01

Brands by name

Popular brands

Kirisun DP580-01, User Manual

Search results

Summary of Contents for DP580-01

Reviews:

Related manuals for DP580-01

Brands by name

Popular brands