1
Knowledge Base |
©2021 Icom America Inc. The Icom logo is a registered trademark of Icom Inc.
V10MR User Programming Guide
Your new V10MR, in its default state, works correctly with other new (no programming changes) V10MR
radios. Please refer to your instruction manual for basic steps to operate the radio with no
programming changes.
Should you want to change channel assignments, tones, or special features, your V10MR radio has a
number of advanced radio features that can be enabled through its software (CS-V10MR).
To program the radios, you will need the following:
•
CS-V10MR Cloning Software. Available for free download on the Icom America website
(Products >Landmobile >V10MR).
•
OPC 478UC Cloning Cable (“B” version only). Available from an Icom America Landmobile Dealer
in your area.
•
PC running Windows 10 operating system. Note: Apple and Android software is not available.
Default Channels/Frequencies and Tone
Channel
Frequency
Bandwidth CTCSS tone
1
151.820MHz
Narrow
67Hz
2
151.880MHz
Narrow
67Hz
3
151.940MHz
Narrow
67Hz
4
154.570MHz
Wide
67Hz
5
154.600MHz
Wide
67Hz
CS-V10MR Software Modes
The CS-V10MR software has two modes,
Simple
and
Full
.
Simple Programming Mode
: Allows adding duplicates of the 5 MURS frequencies for the purpose of
using different CTCSS or DTCS tones.
Full Programming Mode
: Allows adding duplicates of the 5 MURS frequencies and the addition of a
larger suite of features.
Note
: Incorrect Settings in the Full Programming Mode can cause incorrect operation of the radio. Icom
suggests these features be programmed by an Icom dealer only.
