Kia 2015 Sorento Owner'S Manual Download Page 302

Page: 302 / 565

Features of your vehicle

218

VOICE RECOGNITION

Using Voice Recognition

Starting Voice Recognition

Shortly press the

key on the

steering wheel. Say a command

If prompt feedback is in [ON], then
the system will say “Please say a
command after the beep (BEEP)”
• If prompt feedback is in [OFF]

mode, then the system will only
say “(BEEP)”

• To change Prompt Feedback

[On]/[Off], go to

[System]

[Prompt Feedback]

• For proper recognition, say the

command after the voice instruc-
tion and beep tone.

Contact List Best Practices

1) Use full names vs. short or single

syllable names (“John Smith” vs.
“Dad”, “Smith Residence” vs.
“Home”)

2) Avoid using special characters or

hyphens (@, &, #, /, -, *, +, etc.)

3) Avoid using acronyms (“In Case

Emergency” vs. “ICE”)

4) Spell words completely, no abbre-

viations (“Doctor Goodman” vs.
“Dr. Goodman”)

SETUP

CLOCK

UM CAN (ENG) 4b (Audio).qxp 11/7/2014 4:49 PM Page 218

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands