Kia 2015 Sorento Owner'S Manual Download Page 172

Page: 172 / 565

Features of your vehicle

Sound

Park assist system vol. (if equipped)

Adjust the Park Assist System vol-
ume. (Level 1~3).

Blind spot detection Sound (if equipped)

If this item is checked, the blind spot
detection sound function will be acti-
vated.

Welcome sound(if equipped)

If this item is checked, the welcome
sound function will be activated.

Seat / Steering

Seat easy access (if equipped)

If this item is checked, the driver’s
seat will automatically move forward
or rearward for the driver to enter or
exit the vehicle comfortably.

Steering Position

If this item is checked, the warning
function regarding the steering wheel
alignment will be activated.

Service interval

On this mode, you can activate the
service interval function with mileage
(mi. or km) and period (months).
• Off : The service interval function

will be deactivated.

• On : You can set the service inter-

val (km and months).

UM CAN (ENG) 4.qxp 12/1/2014 12:54 PM Page 88

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands