manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual

The Kia 2015 Sorento Owner's Manual offers comprehensive guidance for maximizing your SUV's performance and features. Easily download this essential manual for free from our website, providing you with easy access to all the necessary information to make the most out of your Kia Sorento experience.

Share
Download
background image

Maintenance

98

7

EMISSION CONTROL SYSTEM

The emission control system of your
vehicle is covered by a written limited
warranty. Please see the warranty
information contained in the
Warranty & Maintenance booklet in
your vehicle.
Your vehicle is equipped with an
emission control system to meet all
applicable emission regulations.
There are three emission control
systems, as follows.

(1) Crankcase emission control sys-

tem

(2) Evaporative emission control sys-

tem

(3) Exhaust emission control system

In order to assure the proper function
of the emission control systems, it is
recommended that you have your
vehicle inspected and maintained by
an authorized Kia dealer in accor-
dance with the maintenance sched-
ule in this manual.

Caution for the Inspection and
Maintenance Test (With Electronic
Stability Control (ESC) system)
• To prevent the vehicle from mis-

firing during dynamometer test-
ing, turn the Electronic Stability
Control (ESC) system off by
pressing the ESC switch.

• After dynamometer testing is

completed, turn the ESC system
back on by pressing the ESC
switch again.

1. Crankcase emission control

system

The positive crankcase ventilation
system is employed to prevent air
pollution caused by blow-by gases
being emitted from the crankcase.
This system supplies fresh filtered air
to the crankcase through the air
intake hose. Inside the crankcase,
the fresh air mixes with blow-by
gases, which then pass through the
PCV valve into the induction system.

2. Evaporative emission con-

trol (including ORVR:
Onboard Refueling Vapor
Recovery) 
system

The Evaporative Emission Control
System is designed to prevent fuel
vapors from escaping into the atmos-
phere.
(The ORVR system is designed to
allow the vapors from the fuel tank to
be loaded into a canister while refu-
eling at the gas station, preventing
the escape of fuel vapors into the
atmosphere.)

UM CAN (ENG) 7.qxp  12/1/2014  1:20 PM  Page 98

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

Kargo Master 40131 Installation Manual preview
40131
Brand: Kargo Master Pages: 5
Quadratec QR3 Installation Manual preview
QR3
Brand: Quadratec Pages: 8
Taffio CH7102-FCX9 Quick Start Manual preview
CH7102-FCX9
Brand: Taffio Pages: 8
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
TATA Motors tigor Owner'S Manual preview
tigor
Brand: TATA Motors Pages: 159
Honda 2010 Civic Sedan Owner'S Manual preview
2010 Civic Sedan
Brand: Honda Pages: 390
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Mazda 2006 RX-8 Service Highlights preview
2006 RX-8
Brand: Mazda Pages: 122
Paccar DAF CHARGEMAX 90 User Manual preview
DAF CHARGEMAX 90
Brand: Paccar Pages: 40
Quadratec 12057.0263 Installation Manual preview
12057.0263
Brand: Quadratec Pages: 12
Oldsmobile 2003 Alero Owner'S Manual preview
2003 Alero
Brand: Oldsmobile Pages: 354
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Renault Laguna III Manual preview
Laguna III
Brand: Renault Pages: 3699
Dodge CHALLENGER HELLCAT 2017 Owner'S Manual preview
CHALLENGER HELLCAT 2017
Brand: Dodge Pages: 484
Blue Ox BX1120 Installation Instructions preview
BX1120
Brand: Blue Ox Pages: 5
Westin 28-0160 Instructions preview
28-0160
Brand: Westin Pages: 3

Brands by name

Popular brands

Load more brands