manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual, Page: 159 / 565

Share
Download
Kia 2015 Sorento Owner'S Manual Download Page 159

4 75

Features of your vehicle

Engine Coolant Temperature
Gauge

This gauge indicates the tempera-
ture of the engine coolant when the
ignition switch or Engine Start/Stop
button is ON.

If the gauge pointer moves beyond
the normal range area toward the “H”
position, it indicates overheating that
may damage the engine.
Do not continue driving with an over-
heated engine. If your vehicle over-
heats, refer to “If the Engine
Overheats” in chapter 6.

Fuel Gauge

This gauge indicates the approxi-
mate amount of fuel remaining in the
fuel tank.

✽

✽

NOTICE

• The fuel tank capacity is given in

chapter 8.

• The fuel gauge is supplemented by

a low fuel warning light, which
will illuminate when the fuel tank
is nearly empty.

• On inclines or curves, the fuel

gauge pointer may fluctuate or the
low fuel warning light may come
on earlier than usual due to the
movement of fuel in the tank.

WARNING - 

Hot radiator

Never remove the radiator cap
when the engine is hot. The
engine coolant is under pres-
sure and could cause severe
burns. Wait until the engine is
cool before adding coolant to
the reservoir.

OUM044105

■

Type A

■

Type B

OUM044106

■

Type A

■

Type B

UM CAN (ENG) 4.qxp  12/1/2014  12:53 PM  Page 75

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments