manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual

The Kia 2015 Sorento Owner's Manual offers comprehensive guidance for maximizing your SUV's performance and features. Easily download this essential manual for free from our website, providing you with easy access to all the necessary information to make the most out of your Kia Sorento experience.

Share
Download
background image

5 99

Driving your vehicle

Hitches 

It's important to have the correct
hitch equipment. Crosswinds, large
trucks going by, and rough roads are
a few reasons why you’ll need the
right hitch. Here are some rules to
follow:
• Will you have to make any holes in

the body of your vehicle when you
install a trailer hitch? If you do, then
be sure to seal the holes later
when you remove the hitch.
If you don’t seal them, deadly car-
bon monoxide (CO) from your
exhaust can get into your vehicle,
as well as dirt and water.

• The bumpers on your vehicle are

not intended for hitches. Do not
attach rental hitches or other
bumper-type hitches to them. Use
only a frame-mounted hitch that
does not attach to the bumper.

• Kia trailer hitch accessory is avail-

able at an authorized Kia dealer.

Safety chains 

You should always attach chains
between your vehicle and your trail-
er. Cross the safety chains under the
tongue of the trailer so that the
tongue will not drop to the road if it
becomes separated from the hitch.
Instructions about safety chains may
be provided by the hitch manufactur-
er or by the trailer manufacturer.
Follow the manufacturer’s recom-
mendation for attaching safety
chains. Always leave just enough
slack so you can turn with your trail-
er. And, never allow safety chains to
drag on the ground.

Trailer brakes 

If your trailer is equipped with a brak-
ing system, make sure it conforms to
your local regulations and that it is
properly installed and operating cor-
rectly.
If your trailer weight exceeds the
maximum allowed weight without
trailer brakes, then the trailer will also
require its own brakes as well. Be
sure to read and follow the instruc-
tions for the trailer brakes so you’ll be
able to install, adjust and maintain
them properly.
• Don’t tap into or modify your vehi-

cle's brake system.

WARNING

- Trailer

brakes

Do not use a trailer with its own
brakes unless you are absolute-
ly certain that you have proper-
ly set up the brake system. This
is not a task for amateurs. Use
an experienced,

competent

trailer shop for this work.

UM CAN (ENG) 5.QXP  12/1/2014  1:07 PM  Page 99

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

Davis Instruments 8127 Installation Instructions Manual preview
8127
Brand: Davis Instruments Pages: 16
U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Harken Hoister SUP Manual preview
SUP
Brand: Harken Hoister Pages: 12
Yamaha Raptor Instruction Supplement preview
Raptor
Brand: Yamaha Pages: 2
Waeco MagicComfort MSH200 Installation And Operating Instructions Manual preview
MagicComfort MSH200
Brand: Waeco Pages: 108
Tusk RL-HM018R Installation Instructions And Information Manual preview
RL-HM018R
Brand: Tusk Pages: 2
Metra Electronics 95-8202 Installation Instructions Manual preview
95-8202
Brand: Metra Electronics Pages: 20
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
T-Mobile SyncUP DRIVE Start Manual preview
SyncUP DRIVE
Brand: T-Mobile Pages: 2
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
Prime Design URX-001-E Assembly Instructions Manual preview
URX-001-E
Brand: Prime Design Pages: 8
Safe Fleet PRIME DESIGN HRR3-E-PM52 Manual preview
PRIME DESIGN HRR3-E-PM52
Brand: Safe Fleet Pages: 12
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Cadillac 2005 XLR Owner'S Manual preview
2005 XLR
Brand: Cadillac Pages: 438
BMW 325i 1991 Electrical Troubleshooting Manual preview
325i 1991
Brand: BMW Pages: 64
Masterbuilt Hitch-Haul 30110315 Operation Manual & Safety Instructions preview
Hitch-Haul 30110315
Brand: Masterbuilt Pages: 2
chinavasion CVTM-C163 User Manual preview
CVTM-C163
Brand: chinavasion Pages: 3
Federal Signal Corporation CommCenter 300MB-SD Installation And Maintenance Manual preview
CommCenter 300MB-SD
Brand: Federal Signal Corporation Pages: 60

Brands by name

Popular brands

Load more brands