Kia 2015 Sorento Owner'S Manual Download Page 128

Page: 128 / 565

Features of your vehicle

Opening the hood

1. Pull the release lever to unlatch

the hood. The hood should pop
open slightly.

Open the hood after turning off the
engine on a flat surface, shifting the
shift lever to the P (Park) position
and setting the parking brake.

2. Go to the front of the vehicle, raise

the hood slightly, pull the second-
ary latch (1) inside of the hood
center and lift the hood (2).

3. Raise the hood. It will completely

rise by itself after it has been
raised about halfway.

HOOD

OUM044022

OUM044023

UM CAN (ENG) 4.qxp 12/1/2014 12:51 PM Page 44

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands