Kia 2015 Sorento Owner'S Manual Download Page 139 | Manualshive

Page: 139 / 565

background image

4 55

Features of your vehicle

Electric power steering (EPS)

The power steering uses a motor to
assist you in steering the vehicle. If
the engine is off or if the power steer-
ing system becomes inoperative, the
vehicle may still be steered, but it will
require increased steering effort.
The motor driven power steering is
controlled by a power steering con-
trol unit which senses the steering
wheel torque and vehicle speed to
command the motor.
The steering becomes heavier as
the vehicle’s speed increases and
becomes lighter as the vehicle’s
speed decreases for optimum steer-
ing control.
Should you notice any change in the
effort required to steer during normal
vehicle operation, have the power
steering checked by an authorized
Kia dealer.

• If the Electric Power Steering

System does not operate normally,
the warning light will illuminate on
the instrument cluster. The steering
wheel may require increased
steering effort. Take your vehicle to
an authorized Kia dealer and have
the vehicle checked as soon as
possible.

• When you operate the steering

wheel in low temperature, noise
may occur. If temperature rises, the
noise will likely disappear. This is a
normal condition.

• When the vehicle is stationary, and

the steering wheel is turned all the
way to the left or right continuous-
ly, the steering wheel becomes
harder to turn. The power assist is
limited to protect the motor from
overheating.
As time passes, the steering wheel
will return to its normal condition.

✽

✽

NOTICE

The following symptoms may occur
during normal vehicle operation:
• The EPS warning light does not

illuminate.

• The steering gets heavy immedi-

ately after turning the ignition
switch on. This happens as the sys-
tem performs the EPS system
diagnostics. When the diagnostics
are completed, the steering wheel
will return to its normal condition.

• A click noise may be heard from

the EPS relay after the ignition
switch is turned to the ON or
LOCK (OFF) position.

• A motor noise may be heard when

the vehicle is at a stop or at a low
driving speed.

• If the Electric Power Steering

System does not operate normally,
the warning light will illuminate on
the instrument cluster. The steer-
ing wheel may become difficult to
control or operate abnormally.
Take your vehicle to an authorized
Kia dealer and have the vehicle
checked as soon as possible.

(Continued)

STEERING WHEEL

UM CAN (ENG) 4.qxp 12/1/2014 12:52 PM Page 55

«
...
137
138
139
140
141
...
»

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

Brand: ULTIMATE SPEED Pages: 19

Brand: GARO Pages: 23

LS4 Wallmounted

Brand: GARO Pages: 15

Brand: Warrior Products Pages: 3

Brand: Neuspeed Pages: 2

RGBW Rock Lights

Brand: Lit Lightz Pages: 3

Brand: MVG Pages: 18

Brand: A-Tach Mounts Pages: 2

Brand: Mitsubishi Pages: 367

Brand: Rigid Hitch Pages: 2

Brand: Federal Signal Corporation Pages: 20

Brand: Hyundai Pages: 380

530 GRAN TURISMO - 2010

Brand: BMW Pages: 26

Brand: injen technology Pages: 3

Brand: TRAMEC Pages: 116

Brand: Whelen Engineering Company Pages: 2

Brand: Honda Pages: 358

Brand: Motorola Pages: 100

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands