manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual

The Kia 2015 Sorento Owner's Manual offers comprehensive guidance for maximizing your SUV's performance and features. Easily download this essential manual for free from our website, providing you with easy access to all the necessary information to make the most out of your Kia Sorento experience.

Share
Download
background image

Driving your vehicle

92

5

Smooth cornering

Avoid braking or gear changing in
corners, especially when roads are
wet. Ideally, corners should always
be taken under gentle acceleration. If
you follow these suggestions, tire
wear will be held to a minimum.

Driving at night

Because night driving presents more
hazards than driving in the daylight,
here are some important tips to
remember:
• Slow down and keep more dis-

tance between you and other vehi-
cles, as it may be more difficult to
see at night, especially in areas
where there may not be any street
lights.

• Adjust your mirrors to reduce the

glare from other driver's head-
lights.

• Keep your headlights clean and

properly aimed. (On vehicles not
equipped with the automatic head-
light aiming feature.) Dirty or
improperly aimed headlights will
make it much more difficult to see
at night.

• Avoid staring directly at the head-

lights of oncoming vehicles. You
could be temporarily blinded, and it
will take several seconds for your
eyes to readjust to the darkness.

OUM054140

OUM054141L

UM CAN (ENG) 5.QXP  12/1/2014  1:07 PM  Page 92

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

Valeo SC400 Operating Instructions Manual preview
SC400
Brand: Valeo Pages: 17
Daihatsu F300 Service Manual preview
F300
Brand: Daihatsu Pages: 1718
Vauxhall MOVANO Owner'S Manual preview
MOVANO
Brand: Vauxhall Pages: 177
Metra Electronics 99-3103 Installation Instructions preview
99-3103
Brand: Metra Electronics Pages: 2
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Ratio Power box Manual preview
Power box
Brand: Ratio Pages: 12
Horn Tools PHRRF002 Mounting Instructions preview
PHRRF002
Brand: Horn Tools Pages: 8
Honda 2009 S2000 Owner'S Manual preview
2009 S2000
Brand: Honda Pages: 268
Jeep CHEROKEE 2017 User Manual preview
CHEROKEE 2017
Brand: Jeep Pages: 374
Edelbrock 5756 Installation Instructions preview
5756
Brand: Edelbrock Pages: 1
Kargo Master 48132 Instruction Manual preview
48132
Brand: Kargo Master Pages: 9
Buick Enclave Owner'S Manual preview
Enclave
Brand: Buick Pages: 394
Volkswagen Zubehör 2H5 055 202 A Fitting Instructions Manual preview
2H5 055 202 A
Brand: Volkswagen Zubehör Pages: 40
iDataLink ADS-BLADE AL Install Manual preview
ADS-BLADE AL
Brand: iDataLink Pages: 11
Paser KIT052USSU12 Manual preview
KIT052USSU12
Brand: Paser Pages: 10
E-Trailer E-LEVEL Product Manual preview
E-LEVEL
Brand: E-Trailer Pages: 8
T-Rex TEX-51127 Installation Manual preview
TEX-51127
Brand: T-Rex Pages: 9

Brands by name

Popular brands

Load more brands