Kia 2015 Sorento Owner'S Manual Download Page 190

Page: 190 / 565

Features of your vehicle

106

High Beam Indicator
Light

This indicator light illuminates:

• When the headlights are on and in

the high beam position

• When the turn signal lever is pulled

into the Flash-to-Pass position.

High beam assist indica-
tor (if equipped)

This warning light illuminates :

• When the high-Beam is on with the

light switch in the AUTO light posi-
tion.

• If your vehicle detects oncoming or

preceding vehicles, the High beam
assist system will switch the high
beam to low beam automatically.

For more details, refer to "High beam
assist" in this chapter.

Light ON Indicator Light

This indicator light illuminates:

• When the tail lights or headlights

are on.

Front Fog Indicator
Light (if equipped)

This indicator light illuminates:

• When the front fog lights are on.

Washer Fluid Warning
Light (if equipped)

This warning light illuminates:

• When the washer fluid level in the

reservoir is nearly empty.
In this case, you should refill the
washer fluid.

Cruise Indicator Light
(if equipped)

This indicator light illuminates:

• When the cruise control system is

enabled.

For more details, refer to “Cruise
Control System” in chapter 5.

CRUISE

UM CAN (ENG) 4.qxp 12/1/2014 12:54 PM Page 106

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands