Kia 2015 Sorento Owner'S Manual Download Page 191

Page: 191 / 565

4 107

Features of your vehicle

Cruise SET Indicator
Light (if equipped)

This indicator light illuminates:

• When the cruise control speed is set.

For more details, refer to “Cruise
Control System” in chapter 5.

AUTO HOLD Indicator
Light (if equipped)

This indicator light illuminates:

• [White] When you activate the auto

hold system by pressing the AUTO
HOLD button.

• [Green] When you stop the vehicle

completely by depressing the
brake pedal with the auto hold sys-
tem activated.

• [Yellow] When there is a malfunc-

tion with the auto hold system.
In this case, have your vehicle
inspected by an authorized Kia
dealer.

❈

For more details, refer to “Auto
Hold” in chapter 5.

All Wheel Drive (AWD)
LOCK Indicator Light
(if equipped)

This indicator light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3

seconds and then goes off.

• When you select AWD Lock mode

by pressing the AWD LOCK button.
- The AWD LOCK mode is to

increase the drive power when
driving on wet pavement, snow
covered roads and/or off-road.

SET

AUTO

HOLD

CAUTION -

AWD Lock
Mode

Do not use AWD LOCK mode on
dry paved roads or highway, it
can cause noise, vibration or
damage of AWD related parts.

UM CAN (ENG) 4.qxp 12/1/2014 12:54 PM Page 107

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands