background image

5 83

Driving your vehicle

The LDWS may not warn you
even if the vehicle leaves the
lane, or may warn you even if
the vehicle does not leave the
lane when;

• The lane is not visible due to snow,

rain, stain, a puddle or other envi-
ronmental conditions.

• The brightness of the outside

changes suddenly such as tunnel
enter/exit.

• The headlights are off at night or in

a tunnel.

• The color of the lane marking from

the road is difficult to distinguish.

• Driving on a steep grade or a

curve.

• Light such as street light, sunlight

or oncoming vehicle light reflects
from water on the road.

• The lens or windshield is stained

with foreign matter.

• The sensor cannot detect the lane

because of fog, heavy rain or
heavy snow.

• The surrounding of the inside rear

view mirror temperature is high
due to a direct ray of light.

• The lane is very wide or narrow.
• The lane line is damaged or indis-

tinct.

• The windshield is fogged by humid

air in the vehicle.

• The shadow is on the lane line by a

median strip.

• The sensor cannot distinguish the

lane from the road due to the
dust/dirt.

• There is a mark similar to a lane

line.

• There is a boundary structure.
• The distance from vehicle ahead is

very short or the vehicle ahead
drives hiding the lane line.

• The vehicle vibrates heavily due to

road conditions.

• The lane number increases or

decreases or the lane lines are
crossing.

• Putting something on the dash-

board.

• Driving with the sun in front of you.

• Driving in areas under construc-

tion.

• The lane line is more than two in

either side (Left/Right)

This device complies with
Industry Canada licence-exempt
RSS standard(s).
Operation is subject to the following
two conditions:
(1) This device may not cause inter-

ference, and 

(2) This device must accept any

interference, including interfer-
ence that may cause undesired
operation of the device.

UM CAN (ENG) 5.QXP  12/1/2014  1:07 PM  Page 83

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews: