manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual

The Kia 2015 Sorento Owner's Manual offers comprehensive guidance for maximizing your SUV's performance and features. Easily download this essential manual for free from our website, providing you with easy access to all the necessary information to make the most out of your Kia Sorento experience.

Share
Download
background image

Maintenance

96

7

Keep paint and trim in good con-
dition
Scratches or chips in the finish
should be covered with "touch-up"
paint as soon as possible to reduce
the possibility of corrosion. If bare
metal is showing through, the atten-
tion of a qualified body and paint
shop is recommended.

Bird droppings : Bird droppings are
highly corrosive and may damage
painted surfaces in just a few hours.
Always remove bird droppings as
soon as possible.

Don't neglect the interior
Moisture can collect under the floor
mats and carpeting and cause corro-
sion. Check under the mats periodi-
cally to be sure the carpeting is dry.
Use particular care if you carry fertil-
izers, cleaning materials or chemi-
cals in the vehicle.
These should be carried only in
proper containers and any spills or
leaks should be cleaned up, flushed
with clean water and thoroughly
dried.

Interior care

Interior general precautions 

Prevent chemicals such as perfume,
cosmetic oil, sun cream, hand clean-
er, and air freshener from contacting
the interior parts because they may
cause damage or discoloration. If
they do contact the interior parts,
wipe them off immediately. If neces-
sary, use a vinyl cleaner, see product
instructions for correct usage.

CAUTION - 

Electrical
components

Never allow water or other liq-
uids to come in contact with
electrical/electronic compo-
nents inside the vehicle as this
may damage them.

CAUTION - 

Leather

When cleaning leather products
(steering wheel, seats etc.), use
neutral detergents or low alco-
hol content solutions. If you use
high alcohol content solutions
or acid/alkaline detergents, the
color of the leather may fade or
the surface may get stripped off.

UM CAN (ENG) 7.qxp  12/1/2014  1:20 PM  Page 96

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

UGREEN Car Cup Holder Phone Mount Manual preview
Car Cup Holder Phone Mount
Brand: UGREEN Pages: 9
Audiovox Code Alarm PROFESSIONAL SERIES CA 5550SST Owner'S Manual preview
Code Alarm PROFESSIONAL SERIES CA 5550SST
Brand: Audiovox Pages: 14
Mazda 1989 323 Manual preview
1989 323
Brand: Mazda Pages: 13
Ecco Vantage 12 Series Installation And Operation Instructions preview
Vantage 12 Series
Brand: Ecco Pages: 5
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Horn Tools HJIMRR02FIT Mounting Instructions preview
HJIMRR02FIT
Brand: Horn Tools Pages: 12
Menabo YELO 4 NS Fitting Instructions Manual preview
YELO 4 NS
Brand: Menabo Pages: 8
Audiovox Prestige 128-8602 Installation Manual preview
Prestige 128-8602
Brand: Audiovox Pages: 8
Guardsman G14776S Fitting Instruction preview
G14776S
Brand: Guardsman Pages: 2
Jaeger 12500628 Fitting Instructions Manual preview
12500628
Brand: Jaeger Pages: 17
Opel 2016 Mokka Owner'S Manual preview
2016 Mokka
Brand: Opel Pages: 233
Teletrac Prism TM450 Installation Manual preview
Prism TM450
Brand: Teletrac Pages: 12
Jeep Wrangler Postal Vehicle 2017 Owner'S Manual Supplement preview
Wrangler Postal Vehicle 2017
Brand: Jeep Pages: 62
Honda 2013 Civic Coupe Technology Reference Manual preview
2013 Civic Coupe
Brand: Honda Pages: 13
CITROËN DS4 DSign Description preview
DS4 DSign
Brand: CITROËN Pages: 40
Hella Gutmann mega macs ONE User Manual preview
mega macs ONE
Brand: Hella Gutmann Pages: 380
SSANGYONG ACTYON SPORTS Instruction preview
ACTYON SPORTS
Brand: SSANGYONG Pages: 14

Brands by name

Popular brands

Load more brands