manualshive.com logo in svg

Kia 2015 Sorento, Owner'S Manual

The Kia 2015 Sorento Owner's Manual offers comprehensive guidance for maximizing your SUV's performance and features. Easily download this essential manual for free from our website, providing you with easy access to all the necessary information to make the most out of your Kia Sorento experience.

Share
Download
background image

Driving your vehicle

70

5

When Active ECO is activated:
• The acceleration may slightly be

reduced even though you depress
the accelerator fully.

• The air conditioner performance

may be limited

• The shift pattern of the automatic

transaxle may change.

• The engine noise may get louder.

The above situations are normal
conditions when the Active Eco
System is activated to improve fuel
efficiency.

Limitation of Active ECO opera-
tion:
If the following conditions occur while
Active ECO is operating, the system
operation is limited even though
there is no change in the ECO indi-
cator.
• When the coolant temperature is

low:
The system will be limited until
engine performance becomes nor-
mal.

• When driving up a hill:

The system will be limited to gain
power when driving uphill because
the engine torque is restricted.

• When using manual mode:

The system will be limited accord-
ing to the shift location.

• When the accelerator pedal is

deeply depressed for a few sec-
onds:
The system will be limited, judging
that the driver wants to speed up.

SPORT mode

SPORT mode focuses on
dynamic driving by auto-
matically adjusting the
steering wheel, engine
and transaxle system.
• When the DRIVE MODE

button is pressed and
the SPORT mode is
selected, the SPORT
indicator (yellow) will illu-
minate.

• When the SPORT mode

is activated, and the
engine start/stop button
is turned off and on it will
change to NORMAL
mode. To turn on the
SPORT mode press
DRIVE MODE button
again.

SPORT

UM CAN (ENG) 5.QXP  12/1/2014  1:06 PM  Page 70

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2015 Sorento

LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Fabbri BICI OK 2 Quick Start Manual preview
BICI OK 2
Brand: Fabbri Pages: 4
AccuAir AA-4397 Installation Manual preview
AA-4397
Brand: AccuAir Pages: 40
Peak PKC0RG Owner'S Manual preview
PKC0RG
Brand: Peak Pages: 10
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
femkes Hopper on Top User Manual preview
Hopper on Top
Brand: femkes Pages: 7
TAUBENREUTHER 29-T080301 Quick Start Manual preview
29-T080301
Brand: TAUBENREUTHER Pages: 8
Nuna Bugaboo turtle Instructions For Installation Manual preview
Bugaboo turtle
Brand: Nuna Pages: 17
Oldsmobile 2000 Oldsmobile Intrigue Owner'S Manual preview
2000 Oldsmobile Intrigue
Brand: Oldsmobile Pages: 348
Unex OBU-352EC Quick Start Manual preview
OBU-352EC
Brand: Unex Pages: 30
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
TATA Motors INDICA eV2 XETA CNG Supplemental Owner'S Manual preview
INDICA eV2 XETA CNG
Brand: TATA Motors Pages: 24
PAC AP4-GM61 Quick Start Manual preview
AP4-GM61
Brand: PAC Pages: 5
Percon Falcon 655 User Manual preview
Falcon 655
Brand: Percon Pages: 49
Pontiac 2006 Relay Getting To Know Manual preview
2006 Relay
Brand: Pontiac Pages: 20
Thule 145012 Quick Start Manual preview
145012
Brand: Thule Pages: 2
Conrad 85 51 49 Operating Instructions Manual preview
85 51 49
Brand: Conrad Pages: 50

Brands by name

Popular brands

Load more brands