Kia 2015 Sorento Owner'S Manual Download Page 180

Page: 180 / 565

Features of your vehicle

Warning lights

✽

NOTICE -

Warning lights

Make sure that all warning lights
are OFF after starting the engine. If
any light is still ON, this indicates a
situation that needs attention.

Air bag Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 6

seconds and then goes off.

• When there is a malfunction with

the SRS.
In this case, have your vehicle
inspected by an authorized Kia
dealer.

Seat Belt Warning Light

This warning light informs the driver
that the seat belt is not fastened.
For more details, refer to the “Seat
Belts” in chapter 3.

WARNING AND INDICATOR LIGHTS

UM CAN (ENG) 4.qxp 12/1/2014 12:54 PM Page 96

Summary of Contents for 2015 Sorento






















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands

Kia 2015 Sorento, Owner'S Manual

Search results

Summary of Contents for 2015 Sorento

Reviews:

Related manuals for 2015 Sorento

Brands by name

Popular brands