![background image](http://html2.mh-extra.com/html/keithley/tec-sourcemeter-2510/tec-sourcemeter-2510_user-manual_4099743148.webp)
Models 2510 and 2510-AT User’s Manual
SCPI Command Reference
10-9
:SOURce[1]
:TEMPerature
Temperature commands.
✓
:ATUNe
Auto Tune commands (Model 2510-AT only).
✓
:LCONstants
Temperature PID loop constants.
✓
:MSETtle
Use minimum settling time criteria.
✓
:GAIN?
Query temperature gain constant.
✓
:DERivative?
Query temperature derivative constant.
✓
:INTegral?
Query temperature integral constant.
✓
:TRANsfer
Accept and install MSET constants as defaults.
✓
:MOVershoot
Use minimum overshoot criteria.
✓
:GAIN?
Query temperature gain constant.
✓
:DERivative?
Query temperature derivative constant.
✓
:INTegral?
Query temperature integral constant.
✓
:TRANsfer
Accept and install MOV constants as defaults.
✓
:TAU?
Query tau value.
✓
:LAG?
Query lag value.
✓
:STARt <n>
Set start temperature value. (Not to exceed
temperature protection level.)
✓
:STARt?
Query temperature start value.
✓
:STOP <n>
Set stop temperature value.
✓
:STOP?
Query stop temperature value. (Not to exceed
temperature protection level.)
✓
:INITiate
Initiate autotune procedure.
✓
:SYSTAU
Program initial skip rate for SHOR, MED, or
LONG Tau loads
:SYSTAU?
Query Systau value.
:LCONstants
Program temperature PID loop constants.
✓
[:GAIN] <n>
Set temperature gain.
<n> = 0 to 1e5 | MIN | MAX | DEF
20.0
✓
[:GAIN]?
Query temperature gain.
✓
:DERivative <n>
Set temperature derivative constant.
<n> = 0 to 1e5| MIN | MAX | DEF
0.0
✓
:DERivative?
Query temperature derivative constant.
✓
:INTegral <n>
Set temperature integral constant.
<n> = 0 to 1e5 | MIN | MAX | DEF
0.6
✓
:INTegral?
Query temperature integral constant.
✓
Table 10-5 (continued)
:SOURce[1] subsystem commands
Command
Description
Default parameter
SCPI
Summary of Contents for TEC SourceMeter 2510
