Keithley TEC SourceMeter 2510, User Manual

Page: 37 / 244

1-18 Getting Started Models 2510 and 2510-AT User’s Manual
Setting Front panel BENCH and GPIB default*
Current function
Setpoint 0A
Current protection limit 2A
Proportional constant 10
Integral constant 20
Derivative constant 0
Resistance function
Setpoint 100
Ω
(100
Ω
RTD or thermistor)
1k
Ω
(1k
Ω
RTD or thermistor)
10k
Ω
(10k
Ω
thermistor)
100k
Ω
(100k
Ω
thermistor)
Protection high limit 200
Ω
(100
Ω
RTD or thermistor)
2k
Ω
(1k
Ω
RTD or thermistor)
20k
Ω
(10k
Ω
thermistor)
200k
Ω
(100k
Ω
thermistor)
Protection low limit 50
Ω
(100
Ω
RTD or thermistor)
500
Ω
(1k
Ω
RTD or thermistor)
5k
Ω
(10k
Ω
thermistor),
50k
Ω
(100k
Ω
thermistor)
Protection state Enabled
Sensor current 2.5mA (100
Ω
range )
833.3µA (1k
Ω
range)
100µA (10k
Ω
range)
33.3µA (100k
Ω
range)
Sensor current auto state On
Sensor type Thermistor
Sense mode 2-wire
Thermistor range 10k
Ω
Proportional constant 20
Integral constant 0.6
Derivative constant 0
Output On/Off Off
Digital I/O enable line Off
Peltier (cooler) ground connect mode Disabled
Digital I/O port output value 15
Display format** Engineering units
Setpoint tolerance percentage 0.5%
Window size 5
* * BENCH defaults are the same as :SYSTem:PRESet defaults ( Section 10 ). GPIB defaults are the same
as *RST defaults ( Section 8 ).
** Not affected by BENCH or GPIB RESET.
Table 1-3 (continued)
Factory front panel default settings