Keithley 2520, User Manual, Page: 249 / 329

14-60 SCPI Command Reference Model 2520 User’s Manual
ILINe <NRf>
:TRIGger[:SEQuence[1]][:TCONfigure]:ILINe <NRf> Select Trigger Link input line
Parameters
<NRf> = 1 Line #1
2 Line #2
3 Line #3
4 Line #4
5 Line #5
6 Line #6
Query
:ILINe? Query input trigger line
Description
This command is used to select input lines for the Trigger Link. For nor-
mal operation, Trigger Link input and output (see “
OLINe <NRf> ”)
should not share the same line.
OLINe <NRf>
:TRIGger[:SEQuence[1]][:TCONfigure]:OLINe <NRf> Select Trigger Link output line
Parameters
<NRf> = 1 Line #1
2 Line #2
3 Line #3
4 Line #4
5 Line #5
6 Line #6
Query
:OLINe? Query output trigger line
Description
This command is used to select output lines for the Trigger Link. For
normal operation, Trigger Link input and output (see “
ILINe <NRf> ”)
should not share the same line.
OUTPut <name>
:TRIGger[:SEQuence[1]][:TCONfigure]:OUTPut <name> Enable/disable trigger output event
Parameters
<name > = TRIGger Trigger on exiting trigger layer
NONE Disable trigger layer output trigger
Query
:OUTPut? Query output trigger event state
Description
This command is used to specify whether or not trigger pulses occur on
the specified output trigger line of the Trigger Link (:OLINe).
With TRIGger selected, an output trigger will occur when exiting the
trigger layer. With NONE selected, the trigger layer output trigger is dis-
abled.