HD Intelligent Speed Dome Camera
User Manual
44
According to event types, there are attribute alarming and entry alarming. The former
includes mask alarming, sunglasses alarming and hat alarming, while the latter includes
non-motor vehicle entry and people entry number alarming.
Configuration steps of attribute alarming are as follows:
1) Go to
Intelligent > Settings > Event Setting
, and select attribute alarming events
by request.
2) Go to
Intelligent > Settings > Parameters
, and configure “Face Snapshot Interval”
by request to control the alarm output time. For example, if it is set 25 frames, when
a human face is recognized, the alarm will be triggered in 1 s (the default being 0, i.e.
the alarm is triggered when the person disappears).
Attention: Only when the face of the person appearing in the image is recognized can
the attribute alarm be triggered.
3) Go to
Settings > Event > Alarm Input
, and edit “Alarm Name” by actual request (i.e.
the alarm text displayed when the attribute alarm is triggered). When the selected
event occurs in the image, the camera will trigger alarm text automatically.
Attention:
If it‟s necessary to output alarm audio, the camera needs to connect to a
loudspeaker or a voice box, which means to connect the wire “Audio Out”
and “GND” to the loudspeaker or voice box. For wire connection, please
refer to the
Quick Start Guide
.
Note: Go to
Settings > System > System Maintenance
, and click “Configuration” to
enter advanced configuration interface and configure “Minimum Alarming
Interval”. The default value is 1 s and can be configured according to the audio
length so as to control the play times of audio. For example, if an audio file is
played once 3 seconds, the minumum alarming interval can be set 3 s. The
minimum alarming interval is available to attribute alarming only.
4) Click
“Save” to validate setting. Click “Reset” to restore to default values.
Configuration steps of entry alarming are as follows:
1) Go to
Intelligent > Settings > Event Setting
, and select and configure entry
alarming events by request.
2) Go to
Settings > Event > Intelligent Function > Entry Guard Area
and select
linkage method by request.
3) Click
“Save” to validate setting. Click “Reset” to restore to default values.
Note:
Human recognition cameras do not support OSD configuration.
When the “Number of People Alarm” is 0, it means the entry alarming is disabled;
when it is 1, it means the entry alarming is enabled; when it is configured in the