HD Intelligent Speed Dome Camera
User Manual
58
2) Select
“SNMP Version” to enable SNMP;
3) Enter "Read community" and "Write community" names;
4) Configure "Trap Address" and
“Trap Port” (default being 162). The camera can send
exception alarm to the management base;
5)
Configure “Trap Group Name”;
6)
Enter “Camera ID”, “Read-only User Name”, “Authentication Method”,
“Authentication Password”, “Encryption Mode” and “Encryption Password”;
7)
Enter “Read/Write User Name”, “Authentication Method”, “Authentication Password”,
“Encryption Mode” and “Encryption Password”;
8) Click "
Save
" to validate settings.
5.3.9
SMTP
SMTP means Simple Message Transfer Protocol. When an alarm is triggered, the system
will send email notification automatically through SMTP protocol. Configuration steps are
as follows:
1) Go to
Settings > Network > Other Protocols > SMTP;
Picture 5-18 SMTP
2) Input SMTP server IP address and port number, which ranges 1 ~ 65535, 25 by
default;
3) Input "Sender" and "Sender Address"; optionally select "Server Authentication" and
input correct user name and password;
4) Input email topic; optionally select "Attachment" and choose attached file format,
then the email sent will attach the relative file;
