HD Intelligent Speed Dome Camera
User Manual
55
3) Input user name and password provided by ISP;
4) Click "
Save
" to validate setting. It will show dynamic IP after dialing succeeds.
5.3.4
K-SNMP
K-SNMP means KEDACOM private network management protocol. Configuration steps
are as follows:
1) Go to
Settings > Network > Other Protocols > K-SNMP;
Picture 5-13 K-SNMP
2) Input "Network Management Server IP Address" and "Device Location";
3) Configure "CPU Utilization Threshold", "Memory Utilization Threshold" and "Packet
Loss Rate Threshold". The default values are all 100, ranging 1 ~ 100;
4) Click "
Save
" to validate setting.
5.3.5
802.1X
802.1X is a port based network access control protocol. User can select "Protocol Type"
manually to control if the device connected to the LAN can access to the LAN, which will
support the requirements of network authentication, charging, safety and management
well. Configuration steps are as follows:
1) Go to
Settings > Network > Other Protocols > 802.1X;
Picture 5-14 802.1X
2)
Select “Enable” to enable IEEE 802.1X protocol;
3) Select "Protocol Type" from the dropdown list
and the default is “EAP-MD5”.
4) Select version from the list of "EAPOL Version";
