HD Intelligent Speed Dome Camera
User Manual
75
switches to that of the second preset when arriving at it without showing the
images during the move.
PTZ Position Display Format: Options include “According to azimuth” and
“Display According to PT position”. Go to
Settings > Camera > OSD
and select
PTZ; then select “According to azimuth” on this interface, and the PT position
will show on the live view i
nterface in azimuth format; when selecting “Display
According to PT position”, the PT position will show on the live view interface in
PT position format.
Last Spot Recovery
Configure the rotation position of the PTZ after recovering from power-off.
Configuration steps are as follows:
1) Select the chechbox to enable last spot recovery;
2) Select recovery mode.
Options include “Last Spot Recovery" and "Load Preset
When Power On";
If selecting
“Last Spot Recovery”, the PT will load to the last position before
powering off automatically when it is powered again. Configure recovery time;
If selecting
“Load Preset When Power On”, the PT will load to the selected
preset directly. Configure preset No.
3) Recovery Time: Configure the recovery time when the power is off, ranging 30 ~
360s, by default 60s.
Note:
When the time the PT stops at a position before powering off exceeds the set
Recovery Time, it will return to this position automatically after powering on
again. If the time is shorter than the set Recovery Time, the PT will return to the
previous position of the one when it is powered off.
When selecting “Load Preset When Power On” as the recovery mode,
“Recovery Time” will change into “Preset”. Select a preset number from the
dropdown list for the PT to load to when it recovers from power-off.
Click “Save” to validate settings.
6.5.2
Guard Tour
Guard Tour means the dome camera can perform preset operations if not receiving any
command in a specific period of time (i.e. the Waiting Time on the interface).
Configuration steps are as follows:
1) Go to
Settings > Camera > PTZ > Guard Tour
;
