HD Intelligent Speed Dome Camera
User Manual
48
Picture 5-3 Positioning
Operation steps
:
1)
Select “
Enable
” to enable positioning function.
2)
Select positioning mode from the dropdown list, options including “Beidou”, “GPS”
and “Beidou&GPS”.
3) Select
speed unit, options including “km/h” and “mile/h”.
4) After finishing configuration
, click “
Save
” and view current location below.
5.1.4
*Multicast
Go to
Settings > Network > IP and Port > Multicast
and configure multicast parameters
such as Stream Type, Media Type and Multicast Address.
Note: Multicast is a method of data packet transmission. The source host can send
the data packets to every host in the group by sending a datagram only. It
also depends on the group relationship maintenance and selection by the
router.
Picture 5-4 Multicast
Stream Type:
the stream to be sent, the default being “Main Stream”.
Media Type:
the media type of the stream to be sent, the default being “Video”.
Multicast Address: the address to send the stream, fill it according to the actual
conditions.
Multicast Port: the multicast port of the multicast address, the default being 61000,
ranging 1 ~ 65535.
Send Mode:
options include “Passive” and “Initiative”. Under “Initiative” mode, if the
multicast addres is normal and valid, the default setting is to send stream to this
multicast address; under “Passive” mode, only when receiving the request of
