HD Intelligent Speed Dome Camera
User Manual
78
2) Select
“Manual” or “Auto”, adjust the PTZ to a proper position and set it as the Left
Limit (Top Limit). Adjust the PTZ again to another position and set it as the Right
Limit (Bottom Limit);
3) The setting takes effect immediately. To clear limits,
click “Clear Horizontal Limit” or
“Clear Vertical Limit”;
4) When enabling manual mode, user can control the PTZ manually and rotate it only
between the left (top) and the right (bottom) limits; when enabling auto mode, the
PTZ will patrol horizontally only between the left (top) and the right (bottom) limits.
6.5.5
Path Mode
Path Mode means the camera patrols around all the valid presets on a path. After
enabling this function, click any button on PTZ control to disable it. Currently, the camera
supports 8 paths and the maximum allowed number of patrol spots on each path is 32.
Configuration steps are as follows:
1) Go to
Settings > Camera > PTZ > Path Mode;
Picture 6-28 Path mode
2) Select path from the dropdown list of
Patrol Path.
3)
Click “
Add
”. Set Patrol Spots and Stay Time in the popup interface. The maximum
allowed number of patrol spots on each path is 32.
Picture 6-29 Add patrol spot