Keba ServoOne Series, User Manual

Page: 11 / 86

11
Safety
ServoOne User Manual SERCOS II and III
ID no.: 1108.26B.3-00 Date: 04/2020
Safety
2 Safety
2.1 Overview
Our devices are state-of-the-art and comply with recognised safety regulations,
nevertheless hazards can arise. In this chapter:
y We provide information on residual risks and hazards that can emanate from
our devices on usage as intended.
y
We warn about the foreseeable misuse of our devices.
y
We refer to the necessary care and measures to be taken to prevent risks.
2.2 Measures for safety
NOTE:
Only install and place in operation your device taking into account the
documents for the related device family!
Our devices are designed for quick, safe commissioning. For your own safety and for the
safe function of your device, please be sure to observe the following points:
1. Follow safety instructions for the devices!
Follow safety instructions and warnings in the information products related to
the devices!
2. Electrical drives are dangerous due to:
y
Electrical voltages > 230 V/460 V. Dangerous voltages may be present
10 min. after the power is switched off. So check that electrical power is not
present!
y
Rotating parts.
y
Automatically starting drives.
y
Hot components and surfaces.
y
Electrostatic discharge.
3. Protection against magnetic and electromagnetic fields during
installation and operation
Persons fitted with heart pacemakers, metallic implants and hearing aids must
not be allowed access to the following areas:
y
Areas in the immediate vicinity of electrical equipment!
y
Areas in which electronics components and drive controllers are installed,
repaired and operated!
y
Areas where motors are installed, repaired and operated!
Particular hazards emanate from motors with permanent magnets.
4. Your qualifications
To prevent injury or damage, personnel may only work on the device if they
have electrical engineering qualifications and knowledge of:
y
National health and safety regulations (BGV A3 4 in Germany).
y
Erection, installation, commissioning and operation of the device.
All work in other areas, such as transport, storage and disposal is only allowed
to be undertaken by trained personnel.
The warranty will be rendered void on failure to follow these instructions!
5. During installation observe the following:
y
Comply with connection conditions and technical data as per the
information
product and the rating plate!
y
Comply with standards and directives on electrical installation, such as
cable
cross-section, shielding, etc.!
y
Do not touch electronic components and contacts!
Electrostatic discharge can harm people and destroy components!
y
Take protection measures and use protective devices as per the applicable
regulations (e.g. EN 60204 or EN 61800-5-1)!
y
Take "device earthing" protection measure!