9 Technical data
9.2
Imaging program specifications
NOTICE!
Device's radiation dose production vary from unit to unit. Radiation dose production,
shown on the GUI, is calculated by scaling a measured reference dose production value with the
selected imaging program technical factors and DAP correction factor. Air KERMA production
can be calculated by dividing the provided DAP value with the active sensor area.
9.2.1
Panoramic programs
NOTICE!
The values given in this chapter are nominal values and apply to 220-240 VAC devices.
The technical factors and their ranges are limited and may differ from the given values when
using a device configured to 100 - 120 VAC.
Panoramic programs & technical factors
Magnification factor: 1.3
Program
Field of view height
kV range
mA range
Exposure time
Standard Panoramic
9.0 s
Segmented Standard
Panoramic
2D/3D:
143.5 mm / 5.6 in
2D:
148.5 mm / 5.8 in
1.4 - 9.0 s
Pediatric Panoramic
9.0 s
Segmented Pediatric
Panoramic
114 mm / 4.5 in
1.4 - 9.0 s
Bitewing
103 mm / 4 in
6.4 s
(3.2 + 3.2 s)
TMJ, Lateral
2D/3D:
143.5 mm / 5.6 in
2D:
148.5 mm / 5.8 in
60 - 70 kV
73 - 81 kV
85 - 90 kV
2.0 - 16.0 mA
2.0 - 14.0 mA
2.0 - 12.5 mA
4.0 s
(2.0 + 2.0 s)
9.2.2
Cephalometric programs
NOTICE!
The values given in this chapter are nominal values and apply to 220-240 VAC devices.
The technical factors and their ranges are limited and may differ from the given values when
using a device configured to 100 - 120 VAC.
Cephalometric programs & technical factors
Magnification factor: 1.145
Program
Field of view width
Field of
view height
kV range
mA range
Exposure time
Lateral projection
223 mm
8.9 in
Pediatric lateral
projection
160-260 mm
6.7 - 10.2 in
180 mm
7.1 in
77 - 81 kV
85 - 90 kV
95 kV
4.0 - 14.0 mA
4.0 - 12.5 mA
4.0 - 11.0 mA
6.5 - 10.5 s
PA projection
200 mm
7.9 in
223 mm
8.9 in
77 - 81 kV
85 - 90 kV
95 kV
4.0 - 14.0 mA
4.0 - 12.5 mA
4.0 - 11.0 mA
8.1 s
ORTHOPANTOMOGRAPH
™
OP 3D
93
