KaVo ORTHOPANTOMOGRAPH OP 3D User Manual Download Page 38

Page: 38 / 109

4 User interfaces

4. ABOUT

Software versions

Shows the serial numbers of:

• The main device
• Sensors
• Tubehead assemblies

Shows also the versions of the installed firmware and hardware.

Notices

Legal information and terms and conditions for use.

Exposure counters

Shows the amount of exposures taken with the device.

Network configuration

Shows the current network configuration of the device:

• IP address
• Subnet mask
• Default gateway
• IP address allocation
• MAC address
• NTP server

SERVICE MODE

NOTICE!

This menu is intended for authorized service personnel only.

This menu is used to unlock Installation and Service specific functions on the GUI.

• Additional device settings
• Calibrations for installation and service of the device
• Optional imaging programs activation
• Demonstration mode activation for exhibition use
• Verification programs for radiation related testing

To access these functions, a PIN code is required.

NOTICE!

The functions unlocked by the PIN code are highlighted with coloured indicators.

ORTHOPANTOMOGRAPH

™

OP 3D

Summary of Contents for ORTHOPANTOMOGRAPH OP 3D














































































































Search results

Summary of Contents for ORTHOPANTOMOGRAPH OP 3D

Reviews:

Related manuals for ORTHOPANTOMOGRAPH OP 3D

Brands by name

Popular brands

KaVo ORTHOPANTOMOGRAPH OP 3D, User Manual

Search results

Summary of Contents for ORTHOPANTOMOGRAPH OP 3D

Reviews:

Related manuals for ORTHOPANTOMOGRAPH OP 3D

Brands by name

Popular brands