manualshive.com logo in svg

KaVo ORTHOPANTOMOGRAPH OP 3D, User Manual

Share
Download
KaVo ORTHOPANTOMOGRAPH OP 3D User Manual Download Page 100

9   Technical data

n

Total X-ray filtration

Do not reuse

Recyclable

Operating instructions

Refer to operating instructions for more information. The operating

 

instructions can be supplied electronically or in paper format.

Caution: Federal law restricts this device to sale by or on the order of a

 

licensed healthcare practitioner.

This symbol indicates that the waste of electrical and electronic

 

equipment must not be disposed as unsorted municipal waste
and must be collected separately. Please contact an authorized

 

representative of the manufacturer for information concerning the

 

decommissioning of your equipment.

CE (0537) symbol

UKCA (UK Conformity Assessed) marking

Swiss authorised representative

NRTL Mark

Conforms to AAMI ES60601-1:2006. Certified to CSA.

GOST R

Importer

Fragile, Handle with Care

 (Packaging)

This way up 

(Packaging)

Keep dry

 (Packaging)

Maximum number of boxes that can be stacked on the bottom box

(Packaging)

100

ORTHOPANTOMOGRAPH

™

 OP 3D

Summary of Contents for ORTHOPANTOMOGRAPH OP 3D














































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands