4 User interfaces
4
User interfaces
4.1
Graphical User Interface (GUI)
4.1.1
GUI Overview
1.
Patient name and identification.
2.
Selection of imaging modality,
PAN
,
CEPH
,
3D
or
CAST
.
3.
Selection of imaging program and imaging program settings.
4.
Main view area. Shows a dental chart for the selected modality and previews of the taken images.
5.
Selection of imaging parameters. Imaging parameters, kV and mA, can be manually adjusted
according to the patient size and skull anatomy.
6.
Exposure time and DAP estimation. Shows the estimated duration of X-ray radiation and the
radiation dose with the selected imaging program and parameters. The actual imaging parameters
and DAP are shown after imaging.
7.
Sample image of the selected program or 3D FOV size and location illustration.
8.
Status message bar and device status indicator.
9.
Device settings and friendly name of the device. Pressing the cogwheel symbol opens a menu
which is used to access the device settings, quality control and calibration programs and to show
the device information, like serial number and software versions.
NOTICE!
The available imaging modalities vary depending on the device configuration.
18
ORTHOPANTOMOGRAPH
™
OP 3D
