7 Troubleshooting
Error code
Problem
Solution
E09014
Coll up opto missing
1. Check connections:
* J2005, J1034
If fail (open) => replace collimator
motors optos cable
* J1034, J1031
If fail (open) => replace collimator
2. Replace i2000.
E09015
Coll right opto missing
1. Check connections:
* J2005, J1036
If fail (open) => replace collimator
motors optos cable
* J1036, J1033
If fail (open) => replace collimator
2. Replace i2000.
E09016
Coll left opto missing
1. Check connections:
* J2005, J1035
If fail (open) => replace collimator
motors optos cable
* J1035, J1032
If fail (open) => replace collimator
2. Replace i2000.
E09017
Resistive sensor pivot missing
1. Check that the wiper is pressing
mechanically onto the surface of an
resistive position sensor.
If fail => replace wiper, spring and
body
2. Check connections:
* J3005, J1018
If fail (open) => replace pivot sensor
movement cable
3. Replace the resistive position
sensor
4. Replace i3000.
E09018
Resistive sensor linear missing
1. Check that the wiper is pressing
mechanically onto the surface of an
resistive position sensor.
If fail => replace linear wiper
assembly
2. Check connections:
* J3004, J1017
ORTHOPANTOMOGRAPH
™
OP 3D
67
