KaVo ORTHOPANTOMOGRAPH OP 3D, Service Manual

Page: 35 / 159

4 Device description
Table 2: Indicators
LED # Color Default
state
Function Notes
H1 Green ON Configuration done
H2 Green ON Ethernet Link
H3 Green ON FPGA init done
H4 Green Blinking Ethernet RX/TX activity
H5 Green ON P1V35 PG OFF when device is
in the sleep mode
H6 Red OFF FPGA PIO LED5
H7 Green OFF PAN_P5V_D_3D ON when 3D
imaging mode
selected and device
is reserved.
H8 Green OFF PAN_P5V_A_CEPH ON when 3D
imaging mode
selected and device
is reserved and.
H9 Green OFF Panel supply P12/P6V PG ON when the device
is reserved
H10 Green OFF PAN_P12V ON when 3D
imaging mode
selected and device
is reserved.
H11 Green ON P24V Board input voltage
H12 Red OFF FPGA FW_ERR ON when error state
H13 Red OFF FPGA CORE_ERR ON when error state
H14 Green Blinking FPGA PIO LED1
FPGA PIO LED0-2
forms a group of
running lights.
Fast blinking (1s
round time) when
FPGA boots up.
Slow blinking
(8s round time)
when FPGA fully
operational.
H15 Green ON P3V3 PG OFF when device is
in the sleep mode.
H16 Red OFF FPGA PIO LED4
H17 Green ON P5V PG OFF when device is
in the sleep mode
H18 Green Blinking FPGA PIO LED2 See H14
H19 Green OFF FPGA PIO LED3
H20 Green Blinking FPGA PIO LED0 See H14
ORTHOPANTOMOGRAPH ™ OP 3D 35