KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Service Manual, Page: 70 / 192

62
3.5.13 EC100 Pan sensor connector board
OUTPUTS:
Optoswitch outputs
INDICATOR LEDS:
None
TEST PINS:
None
DESCRIPTION:
EC100 routes image data from the panoramic x-ray image
sensor assembly and provides operating voltages and con-
trol signals to the sensor. Device-side connector that docks
the sensor to the main unit is mounted on this board.
LOCATION:
In the panoramic sensor mount assembly.
FUNCTIONS:
Signal routing from x-ray sensor assembly to the main unit
via docking connector.
INPUTS:
Image data and control signals to/from sensor.
+6V analog and digital operating voltages.
OUTPUTS:
Image data and control signals to/from sensor
+6V analog and digital operating voltages.
INDICATOR LEDS:
None
TEST PINS:
None
DESCRIPTION: