KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Service Manual, Page: 120 / 192

6 The s2terminal and service functions
112
------------------------------------------------------------------
Note! This list may vary from unit to unit.
3. To open help instructions for a service command key in
help
, space, the name of the service command, for ex-
ample
motortest
, and then press
ENTER
.
------------------------------------------------------------------
------------------------------------------------------------------
Help instruction for that service command will appear.
------------------------------------------------------------------
------------------------------------------------------------------
4. To switch to demo mode use the service command
demomode
.
------------------------------------------------------------------
------------------------------------------------------------------
sets the unit into demonstration mode.
- x-rays are disabled
- no need to have ethernet connection to pc to activate
gui
log
Displays the log entries.
login
Displays unit’s firmware version informa-
tion
logsign
Adds a comment to the log
memtest
Performs a memory test on image memo-
ry area.
motortest
Runs a motor test.
patient
Starts fake study without using driver
posprint
Prints position information of selected
motor.
panelpower
Sets the panel on/off.
readadc
Read adc channels
status
Displays unit’s status information.
systemstatus
Displays status of all optos, micro switch-
es and encoders.
unithandedness
Sets the unit’s handedness.
vaccalib
Calibrates VAC value using real voltage
value.
help motortest
help motortest
Usage: motortest [rounds] [motor]
motortest [rounds]
Drives all or specific motor from limit to limit.
demomode 1