KaVo ORTHOPANTOMOGRAPH OP 3D Pro, Service Manual, Page: 114 / 192

6 The s2terminal and service functions
106
6.1 Opening the s2Terminal
Opening the s2terminal from the release package
Copy the software release package to the host PC and
unzip it. Locate openS2.bat in the unzipped release
package and double click it. You will be prompted for unit’s
IP address. Type it in (if other than default) and press
enter. An s2terminal connection is established to the unit.
Opening the s2terminal with the Command Prompt
1. Open the
Command Prompt
(
Start\Programs\Accessories
).
2. In the Command prompt key in
cd
and then path where
the s2terminal application has been installed (e.g.
c:\program files\s2terminal
).
-----------------------------------------------------------------
cd c:\program fi les\s2terminal
-----------------------------------------------------------------
Press
ENTER
.
3. Key in
s2terminal
and then the
IP address
of the unit.
Press
Settings
on the touch screen display. The IP ad-
dress of the unit is shown in the settings window.
-----------------------------------------------------------------
cd c:\program fi les\s2terminal
-----------------------------------------------------------------
Press
ENTER
to open the s2terminal and make a con-
nection to the unit.
The s2terminal version number will appear together with
a list of commands.
---- S2 Terminal Help --------------------------------------
------------------------------------------------------------------
Software and firmware version numbers will appear af-
ter the basic list of commands.
xh help
xi receive image from the device
xr reserve device
xq quit