KaVo KEY Laser III 1243, Technician'S Instructions

Page: 35 / 180

Technician's instructions KEY Laser III 1243
2 Measuring and configuration
|
2.1 Control unit service program
Sending files from the KEY Laser to the notebook
Requirement
First the target folder of the file to be received must be entered in the hyper terminal.
▶ Example: Send the rsz.exe file to the notebook.
▶ Enter the following command to send this file:
ztrans.exe com1 /s /b19200 rsz.exe
▶ A window is independently opened by the hyper terminal.
The message “Upload complete“ confirms that the file transfer has been successful.
Sending files from the notebook to the KEY Laser
▶ Example: Send “service.exe“ file to the KEY Laser.
▶ Use the command: ztrans.exe com1/r/b19200 to switch the KEY Laser to receive
mode at the Com1 interface (service interface) at 19200 baud.
33/176