▶ Connect the coolant hose directly to the outside of the motor hose without loops
or kinks, and affix with the accompanying holders (evenly distributed).
▶ Before using the pump, completely open the inserted hose clip ①.
The coolant flow is also affected by the outlet in the handpiece or angle piece. A
focused water jet should arise.
▶ Set the pump flow on the device.
Note
To avoid dripping, keep the pump hose length after the pump as short as possible.
Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
7 Troubleshooting | 7.2 Exchange coolant hose
60/66
