W
Y
Z
▶ Press the left button for 3 seconds to select the rinsing function.
▶ Start the drawing of the coolant by pressing the slide pedal.
The flow can be changed in six steps by moving the slide pedal to the side.
▶ The rinsing function is shown in the display.
W
Y
Z
▶ Press the left button briefly to stop the rinsing function.
The device returns to the previously selected function.
5.3.8
Surgical motor in free use
Note
This function is only supported by the
INTRAsurg 300 plus
in conjunction with the
INTRA CL
light, hand and angle pieces.
The recognition function of the INTRA CL light, handpiece and contra-angle hand‐
pieces enable parameters for the free use of handpiece and contra-angle handpie‐
ces to be recognised and adopted.
5.3.9
Request maximum torque
Note
This function is only supported by the
INTRAsurg 300 plus
.
▶ Hold down the enter button after the motor stops.
Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
5 Operation | 5.3 Free use
34/66
