background image

2.2.2

   

Risks from electromagnetic fields (implanted life-sustaining

system)

DANGER

Risks from electromagnetic fields.

The functions of implanted systems (such as pacemakers) can be influenced by

electromagnetic fields.

▶ Patients and users must inquire about implanted systems before using the

motors and check the use.

▶ Evaluate the risks and benefits.

▶ Do not bring the motors close to the systems.

▶ Take suitable emergency precautions and immediately react to any changes

in health.

▶ Symptoms such as elevated heart beat, irregular pulse and dizziness are signs

of problems with a pacemaker.

2.2.3

   

Disposal of electronic and electrical devices

Note
According to EC directive 2002/96 concerning used electrical and electronic devi‐

ces, this product is subject to the cited directive and must be disposed of accord‐

ingly within Europe.

Before disassembling / disposing of the product, it must be completely processed

(disinfected, sterilized) according to the section "Preparation methods"

Additional information can be obtained from KaVo (www.kavo.com) or your dental

supplier.

For final disposal, contact:

Germany

To return an electrical device, proceed as follows:

1. At the homepage www.enretec.de of enretec GmbH, you can download a form

for a disposal request under the menu item 

eom

, or you can use it as an online

request.

2. Fill out the request with the corresponding information, and send it as an online

request or by fax (+49(0)3304 3919 590) to enretec GmbH.

The following avenues are also available for questions and for initiating a dis‐

posal request:

Telephone: +49 (0) 3304 3919 500

E-mail: [email protected] and

Post: enretec GmbH, eomRECYCLING Department

Kanalstraße 17

16727 Velten

3. Yourmovabledevice will be picked up in your practice, and yourpermanently in‐

stalledunit will be picked up at the curb at your address on the agreed deadline.

The owner or user of the device will bear the costs for disassembly, transporta‐

tion and packaging.

 

 

 

 

 

Instructions for use INTRAsurg 300 / INTRAsurg 300 plus
2 Safety | 2.2 Purpose – Proper use

10/66

Summary of Contents for INTRAsurg 300







































































Reviews: