Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 7 / 148

ADM 67257 E10

KA T
C - 3
Table of Contents
8.6 Format of the ASCII-File 8-6
9 Super User Mode
9-1
9.1 Activation/Deactivation of the Super User Mode 9-1
9.2 Super User Mode - Things worth mentioning 9-2
9.3 Decide which Sound Path to use 9-2
9.4 Transducer Parameters in Super User Mode 9-3
9.5 Malfunctions during Super User Mode 9-3
10 Virtual Calculation Channels
10-1
10.1 Overview 10-1
10.2 Characteristics of the Calculation Channels 10-1
10.3 Parameterisation of the Calculation Channels 10-2
10.4 Program Branch Output Options for a Calculation Channel 10-2
10.5 Measuring with Calculation Channels 10-4
10.6 Process Outputs from the Calculation Channels 10-4
11 Heat Quantity Measurement (HQM)
11-1
11.1 Overview of the HQM Option 11-1
11.2 Instrument 11-2
11.3 Extension of Program Branch MEASURING 11-2
Installation of the temperature sensors on the pipe 11-3
During the positioning procedure for the transducers 11-4
During measuring 11-5
Correction of the temperature channels 11-6
Enabling or disabling the offset correction 11-6
Input of the correction offsets 11-7
12 Wall Thickness Measurement (WTM)
12-1
12.1 Overview of the WTM Option 12-1
12.2 Instrument 12-1
12.3 Change to Operational Mode WTM 12-2
12.4 WTM Program Branch PARAMETER 12-2
12.4.1 Parameter Input for the Determination of the Wall
Thickness
12-2
12.4.2 Parameter Input for the Determination of the Sound
Velocity
12-3
12.5 WTM Program Branch MEASURING 12-3
12.5.1 Measurement of the Wall Thickness 12-4
12.5.2 Measurement of the Sound Velocity 12-5
12.5.3 Further Information when Measuring 12-5
12.5.4 Measurement Failure 12-6
12.5.5 Possible Reasons for Incorrect Measuring Results 12-6
12.5.6 Storage and Transfer of Thickness Value 12-7
12.5.7 Stop Wall Thickness Measurement 12-7
12.5.8 Conventions when in Super User Mode 12-8
12.6 Program Branch WTM-OUTPUT OPTIONS 12-8
12.6.1 Set-up of the Measuring Quantity 12-8
12.6.2 Set-up of other Output Options 12-8
13 Process Interfaces
13-1
13.1 Set-up of Analogue Outputs 13-1
13.1.1 Decision on Error-Value and Error-Value Delay 13-1
13.1.2 Set-up of Current Loop 13-3
13.1.3 Set-up of Voltage Output 13-3
13.1.4 Set-up of Frequency Output 13-3
13.1.5 Set-up of the Full-Scale Value for all Analogue Outputs 13-3