Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 21 / 148

ADM 6725 E10

KA T
2 - 7
Description of Flowmeter
0 0 6 9 9 9 5.3.3 Set-up of sign for cut-off
flow velocity
Yes Yes Enter the same code.
0 0 6 9 9 9 4.2.1 Enable or disable input
facility for pipe
circumference
No Yes Switch FLUXUS OFF.
If you did not enter the HotCodes correctly, do the following:
Switch the unit off by pressing the BRK key three
times.
Switch the instrument on again using this key.
Try entering the key sequence again.
This is an overview of those inputs which can be called sequentially by HotCode
006999:
>OFF< on
SER:kill spaces
'.' >','<
SER:decimalpoint
';' >'TAB'<
SER:col-separat.
Time-progr.Meas.
off >ON<
Tx Corr.Offset
>OFF< on
Storage Mode
>SAMPLE< average
Quantity Storage
>ONE< both
Flow velocity
>NORMAL< uncorr.
>[J]< [Wh]
Heat quantity
off >ON<
Pipe Circumfer.
absolute >SIGN<
Cut-off Flow
factory >USER<
Cut-off Flow
25 mm
DNmin Sensor'Q'
2.4 Keyboard
The FLUXUS operator interface consists of a keyboard and a two-line display (16
digits per line). The keyboard features three function keys and 12 keys for
numerical data input.
NEX T DISP
M U X DISP
LIG HT
LF
4 - 5 - 6
IN IT
-
O
+
O
O F F
O
O N
O
3x O FF ON
BR K
E NT E R
Several keys have dual functions . Firstly, they
are used for the mode INPUT , secondly for the
mode SELECTION.
During mode SELECTION for example, the arrow-
shaped numerical keys operate as cursor keys.
The initiation of key combinations will have results
depending on the respective context.