Katronic Technologies FLUXUS ADM 6725, Operating Instruction

Page: 93 / 148

ADM 6725 E10

KA T
8 - 7
Measuring Data Transfer to PC
Numb.of Meas.Val.: 123 Number of collected measuring values/lines for this
channel
(3) At first, a line, starting with the characters ‘\*’, is generated where the quantity of
measurement per column is specified. The rows give measuring results per unit of
time, the columns are defined by the column title giving the respective quantities of
measurement.
\* MEASURE; Q_POS; Q_NEG; T1; T2;
7,13; +3,22; -0,44; 20,3; 40,8;
The following column titles can be output:
Title Column format Description Example
CH X: Measurement channel No. (only if the instrument is a
multi-channel unit)
A:
DATE dd.mm.yyyy Date stamp for line with measuring data 05.02.1997
TIME hh:mm:ss Time stamp for line with measuring data 09:34:04
VELOC
±
00.000 Flow velocity [m/s] (/VL+)
0,421
MEASURE
±
000000.00 Quantity of measurement in the unit as defined in the
parameter record
7,13
Q_POS +00000000.00 Forward total Q+ of the selected quantity of
measurement (total throughput quantity in positive
flow direction)
+3,22
Q_NEG -00000000.00 Return total Q- of the selected quantity of
measurement (total throughput quantity in negative
flow direction)
-0,44
(QUANT)
±
00000000.00 Forward (+) OR return total (-) of the selected
quantity of measurement
FQ_POS +00000000.00 Forward total of volume flow (only possible when
quantity of measurement=heat quantity)
FQ_NEG -00000000.00 Return total of volume flow (only possible when
quantity of measurement=heat quantity)
(FQUANT)
±
00000000.00 Forward (+) OR return total (-) of volume flow (only
when quantity of measurement=heat quantity)
T1
±
000.0 Temperature T1 in °C
20,3
T2
±
000.0 Temperature T2 in °C
40,8
Tx(FIX)
±
000.0 Temperature Tx which is not being measured but
was entered as a constant
Tx(KOR)
±
000.0 Temperature Tx which is being corrected by the
value specified in the parameter record
... Columns for other temperature inputs or process
inputs
??? Indicates that no valid measuring value could be
obtained (e.g. air in the pipe, loss of signal). These
characters are also used when values could not be
calculated with the available information.
$UNDEF The measuring value is undefined or it could not be
computed.
------ These characters show that this quantity was not
measured
(4) Starting with the keyword '\DATA', all measured values of the measuring data set are
output. In multi-channel measurement mode, the measured values will be sorted
according to the respective channel (A:, B:, C:, etc.).
There are some keywords (always preceded by backslash ‘\’) which indicate special
operational states or events occurring during measurement:
\WAIT TO START AT: date/time Start of waiting state when in time programmable measuring
mode