Karel DS200, Technical Reference And Installation Manual

Page: 51 / 222

DS Series PBX Technical Reference And Installation Guide
41
The mains On/Off switch is supposed to be set to position “1” for normal operation.
Moreover, in order to put the battery into operation in the systems with battery connection in
case of power failures, the battery switch is also supposed to be set to position “1”. While the
system is being put into operation, the mains switch is supposed to be set to “1”, even in
cases where battery connection is present, and the battery switch is supposed to be set to
“1” after the system has started to operate.
*
AS FOR THE CABINET-TYPE SYSTEMS, IN ORDER TO TURN ON/OFF
THE SYSTEM, THE PRIMARY MAINS AND THE PRIMARY BATTERY SWITCHES
MUST BE TURNED ON AND TURNED OFF, RESPECTIVELY. THE BATTERY AND
MAINS SWITCHES ON SPS200 ARE FOR SECONDARY CONTROL ONLY.
TURNING SPS200 SWITCHES ON AND OFF, BEFORE TURNING THE PRIMARY
MAINS AND THE PRIMARY BATTERY SWITCHES OFF, MAY DAMAGE SPS200.
Dimensions of SPS200 are 8 cm. x 22.5 cm. x 20 cm. and it weighs 2.8 kg.