Karel DS200, Technical Reference And Installation Manual

Page: 133 / 222

DS Series PBX Technical Reference And Installation Guide
123
The table below shows the current driven from each power source for each interface card
type:
Stand-by Current Values
(mA)
Busy Port Current Values
(mA)
Card Name -5VDC +5VDC -48VDC -5VDC +5VDC -48 VDC
EX200 (0/8S0) ISDN BRI EXTENSION MODULE 1 250 17 0 0 25
EX200 (4E&M/0) E&M LINE MODULE 1 70 3 0 10 6
EX200 (0/8LB) LOCAL BATTERY EXTENSION MODULE 22 170 0 0 0 7
EX200 (8 T0/0) ISDN BRI LINE MODULE 0 440 62 0 0 28
EX200 (1E1/0) PRI / R2 / QSIG SWITCHABLE LINE MODULE 0 430 0 0 1 1
EX200 (1CAS3B) DIGITAL LINE MODULE 0 430 0 0 1 1
EX200 (8+/0) ANALOG EXPANDABLE LINE MODULE WITH CALLER ID 20 160 1 4 10 38
EX200 (0/16KoU) DIGITAL EXTENSION MODULE 1 490 90 0 0 10
EX200 (0/8KoU) DIGITAL EXTENSION MODULE 1 440 90 0 0 10
EX200 (0/16R) ANALOG EXTENSION MODULE 1 270 17 0 0 30
EX200 (4TWT) SPECIAL DUPLEX LINE MODULE 10 260 1 0 0 20
EX200 (8TWT) SPECIAL DUPLEX LINE MODULE 10 360 1 0 0 20
EX200 (8E&M/0) E&M LINE MODULE 10 80 1 0 0 3
EX200 (4PLC/0) PLC LINE MODULE 5 70 1 0 20 3
EX200 (16 VoIP) VOICE OVER IP MODULE 0 770 0 0 0 0
EX200 (8 VoIP) VOICE OVER IP MODULE 0 650 0 0 0 0
EX200 (4 VoIP) VOICE OVER IP MODULE - PPC 0 580 0 0 0 0
EX200 (0/16C) CLID ANALOG EXTENSION 35 160 1 0 0 27
EX200 (MGW1) MEDIA GATEWAY MODULE 0 770 0 0 0 0
EX200 (MGW2) ADVANCED MEDIA GATEWAY MODULE 0 860 0 0 0 0
EX200 EVM MODULE 0 120 0 0 0 0
EX200 ALARM CARD 0 40 0 0 0 0
CPU200 0 80 50 0 0 0
CPUKON200 0 50 0 0 0 0
CPU200S 0 80 50 0 0 0
CPKON200S 0 50 0 0 0 0
Utility 0 500 0 0 0 0
Backplane (DS200) 0 100 0 0 0 0
Backplane (DS200S/M) 0 100 0 0 0 0
Since the limitations are directly related with the SPS248 in the DS200 and DS200L racks,
using double SPS248 modules will also double the current capacity of the rack. For example:
At most 6 pieces EX200 (0/16 KoU) cards can be installed in a rack with a single SPS248
while 12 pieces EX200 (0/16 KoU) card can be installed in a rack with two SPS248 modules.