Karel DS200, Technical Reference And Installation Manual

Page: 22 / 222

12
I.5. COMMON UNITS
DS200S and DS200M exchanges are two systems that have been designed to meet different
capacity needs, although they have the same structure. In this regard, it is a natural fact that
many units are employed in both exchanges. Such common units are called ‘the DS200S
unit’ throughout the rest of the guide; so one should keep in mind that the units mentioned in
this way can be employed in both the DS200S and the DS200M exchanges.
The EX200 Expansion Modules and the EVM200L modules listed below can be installed in
the general-purpose slots that are present in racks of the entire exchanges of the DS200
series:
•
EX200 (0/16R) Analog Enhanced Extension Module
•
EX200 (0/16C) Analog Extension Module With Caller ID
•
EX200 (8+/0) Analog Expendable Line Card With Caller ID
•
EX200 (CAS3B/0) CAS Signalling Line Module
•
EX200 (0/8S0) ISDN BRI Extension Module
•
EX200 (1E1/0) PRI / R2 /QSIG Switchable E1 Line Module
•
EX200 (0/8KoU) Digital Extension Module
•
EX200 (0/16KoU) Digital Extension Module
•
EX200 (8T0/0) ISDN BRI External Line Module
•
EX200 (0/8LB) Local Battery Telephone Extension Module
•
EX200 (4VoIP) Voice Over IP Module
•
EX200 (8VoIP) Voice Over IP Module
•
EX200 (16VoIP) Voice Over IP Module
•
EX200 (MGW1) Media Gateway Module
•
EX200 (MGW2) Advanced Media Gateway Module
•
EX200 (4TWT) Special Duplex External Line Module
•
EX200 (8TWT) Special Duplex External Line Module
•
EX200 (4E&M/0) External Line Module
•
EX200 (8E&M/0) External Line Module
•
EX200 (4PLC/0) External Line Module
•
EX200 (ALARM) Alarm Module
•
EVM200L Auto Attendant and Voice Mail Module