92
IX. SOFTWARE
The software structure of the DS200 systems, are configured on a file system which is
structured on Linux Suse 11.0 operating system.
The disc space on the CPU block is fragmented as per the file system. So the optimization of
the memory is provided.
The CPU block can be accessed by a maintenance PC on the same LAN. Thus, the system
parameters are kept accessible and the critical information are preserved.
The files and the programs which are necessary to run the system, are preserved under a
folder called Karel.
The structure of the folder “karel” is shown below:
The directory structure specified above is supposed to be created by the user on the
Windows PC that is utilized for programming purposes. Since the same directory structure
exists on the CPU block, that operation is also necessary to check and copy the specified
files.
►
There are 5 directories under the directory karel, namely sbin, bin, srv, tftpd and home.
•
There are 6 files in the directory “
sbin
”.
1. dsinit: This file specifies the master software that is to run in the system.
2. check: This file allows the read-write-execute permissions of the files to be set.
3. dslog: This file allows the system logs to be displayed.
4. stop: This file allows the system to be stopped.
5. start: This file allows the system to be started up.
6. arpsave: This file is necessary for IP and MAC addresses matching of CC cards.
KAREL
BIN
SVR
HOME
SBIN
TFTPD
ALARM
CM
DATA
CONF
LOG
SNMP
VOICE
DSINIT
FIREWALL
PBXCOMM
SIPSPC
SNMP
ENG/TUR
ACDXXX
WAV
Summary of Contents for DS200
