Karel DS200, Technical Reference And Installation Manual

Page: 5 / 222

IV
Attention!
For the proper operation of the system, please make sure that the following criteria are
satisfied.
♦
Check the performance of the earth line connected to the system. If this line is not safe
enough, make a new and proper earth connection to the system to avoid possible hazards
that may occur due to the high voltages which may affect the system.
♦
For the wall type systems, the rack holder metal part must be 100 cm above from the
floor level.
♦
It must not be permitted to install the system into the places:
•
Exposed to direct sunlight,
•
Extremely hot and cold places,
•
Where the temperature is out of the range of 5 C
o
to +40 C
o
and the relative humidity
is above 80%,
•
Where vibrations or shocks are frequent or strong,
•
Close to radio broadcast antennas,
•
Where the system may be in contact with water, oil or dust,
•
Close to Sulfuric gas producing areas like thermal springs, etc. that may damage the
system,
•
Near high frequency sewing machines or electric welders.
♦
The frequent power cut-off may affect the performance of the system. Therefore, make
sure the system has an uninterrupted power source specific to the system.
♦
Anything, which may prevent proper ventilation of the system may be risky and affect the
performance of the system.